OLI Visam Vibrators (Motovibrators)
Vibrating machines for transport and sieving, fluid beds, compaction tables and foundry shake out.
Vibrating machines for transport and sieving, fluid beds, compaction tables and foundry shake out.
Features
- Power supply: Three-phase from 42 up to 700 V at 50 and 60 Hz; Single-phase from 110 up to 240 V at 50 and 60 Hz.
- Time rating: Continuous at maximum Centrifugal Force (S1)
- Impact protection: IK 10
- Mechanical protection: IP 66
- Insulation class: F standard, H on request
- Coating colour: Powder coated blue RAL 5010 (body) / yellow RAL 1003 (mass covers)
- Installation and operating environment: From –20° up to +40° C
- Thermal protection: Standard (thermistor 130°C) from size 10. Up to size 9 on request
- Centrifugal force: From 30 kg up to 22.800 Kg. Continuous adjusting from 100% to 20% (standard supply: setting at 80%)
- Range: 2, 4, 6, 8, 10, 12 poles & specials
Benefits
- Standard tropicalization
- Lubrication “Greased for life” up to size 4. Long life span greasing from size 4.1 upwards.
- Whichever position of mounting
- All units are tested by VISAM, they undergo a dynamic test-run (with unbalanced weights) before leaving the factory
Products
Visam AMV – Mini Vibrators
The AMV models of mini vibrators are designed and developed to deliver centrifugal forces of up to 30kg for intermittent operation on small hoppers, chutes and containers.
Visam SP Range
The SPV and SPX series includes over 100 models, each of which has dimensional features specifically tailored to each electric motor in particular, the bearings of the 2, 4, 6 and 8 pole versions are available with a complete range of frequencies and voltages that make them suitable for use anywhere. We can also supply special 10 pole and 12 pole models for specific applications upon request.
The SPV and SPX series has a centrifugal force range of 50 kg to 23,000 kg.
Models
- Visam SPV – Low Speed Vibrators
- Visam SPX – Low Speed Vibrators
- Visam SPEx – ATEX and IECEX Vibrators
Resources
